Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: How to hard plumb an Intex

  1. Back To Top    #1

    Join Date
    Mar 2013
    Location
    Dallas, TX
    Posts
    14

    How to hard plumb an Intex

    Hello everyone! I am having difficulty setting up my Intex. The pool is finally up and full of water but the GFI outlet is on the patio and originally we thought we could run an extension cord from the filter to the outlet. After reading on this site that is not wise to do we decided to hard plump. Idea was to run pvc from the pool to the filter and make it a little longer than needed to bring the filter further back from the pool and closer to the patio. Problem is I have no idea how to do such a task. If any one would please guide me in the right direction I would be grateful!
    Discovery LX resin pool 16,400 gal 1.5 hp Pentair sand filter counter sunk 2 ft

  2. Back To Top    #2
    Casey's Avatar
    Join Date
    Apr 2007
    Location
    SW PA
    Posts
    10,157

    Re: How to hard plumb an Intex

    You will get a lot of information about this in the Above Ground Pool section of this forum.
    I'd bet you my bikini you'll never get TFP water from a pool store!

    24' Sharkline Venture De Filter

  3. Back To Top    #3

    Join Date
    Mar 2013
    Location
    Dallas, TX
    Posts
    14

    Re: How to hard plumb an Intex

    Thank you!
    Discovery LX resin pool 16,400 gal 1.5 hp Pentair sand filter counter sunk 2 ft

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •