Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 7 of 7

Thread: Does anyone know the brand of these steps?

  1. Back To Top    #1

    Does anyone know the brand of these steps?

    I got these from a craigslist purchase, but I did not get the part that connects it to the decking. Looking for a brand name to possible order a replacement part. Thanks!

    21' Round 48" Deep Doughboy Timberline III, 9100 Gallons
    Using 80lb Media Master sand filter and 1HP Powerpak II.

  2. Back To Top    #2
    linen's Avatar
    Join Date
    Jul 2010
    Location
    Twin Cities, MN
    Posts
    8,649

    Re: Does anyone know the brand of these steps?

    When I saw your picture I thought "I can help" since I have those same model steps, also purchased from CL...then I realized that I do not know who makes them either...I went and looked at mine and can not find a brand or part number...
    TFP Expert who uses Pool School and my TF100 test kit along with PoolMath for my: Round 11K gallon AGP with deep end, 20" sand filter, Matrix 1hp 2spd, 6 2ftX20ft solar panels (and solar cover!), Intex SWCG (copper bars disconnected) and a Rubadub hot tub (chlorine). The SLAM process is not finished until: 1. CC < 0.5 ppm, 2. An OCLT < 1.0 ppm and, 3. The water is crystal clear.

  3. Back To Top    #3
    Mod Squad Bama Rambler's Avatar
    Join Date
    Jun 2009
    Location
    SouthWest Alabama
    Posts
    22,347

    Re: Does anyone know the brand of these steps?

    Our very own Casey posted a picture of those very same steps a few years ago. ( I knew I remembered seeing that pattern somewhere)
    You can PM her and ask if she remembers the brand, but I doubt she will. Here's the thread.
    Dave J. TFP Moderator
    24' x 52" Round AGP. 2hp/¼hp SPL Power-Flo 2-speed pump. 200sqft Waterway Cartridge Filter. 45MHP2(3GPD) Stenner Peristaltic Pump
    Pool School ----- Pool Math ----- TF-Test Kit

  4. Back To Top    #4

    Re: Does anyone know the brand of these steps?

    Thanks for the replies. I'll message her. It's odd that there is no marking or stamp on them anywhere. Tried looking at google images but no luck. Hopefully someone knows!
    21' Round 48" Deep Doughboy Timberline III, 9100 Gallons
    Using 80lb Media Master sand filter and 1HP Powerpak II.

  5. Back To Top    #5
    linen's Avatar
    Join Date
    Jul 2010
    Location
    Twin Cities, MN
    Posts
    8,649

    Re: Does anyone know the brand of these steps?

    Let us know if you find out.
    TFP Expert who uses Pool School and my TF100 test kit along with PoolMath for my: Round 11K gallon AGP with deep end, 20" sand filter, Matrix 1hp 2spd, 6 2ftX20ft solar panels (and solar cover!), Intex SWCG (copper bars disconnected) and a Rubadub hot tub (chlorine). The SLAM process is not finished until: 1. CC < 0.5 ppm, 2. An OCLT < 1.0 ppm and, 3. The water is crystal clear.

  6. Back To Top    #6

    In the Industry

    JoshU's Avatar
    Join Date
    May 2007
    Location
    New Orleans, LA
    Posts
    541

    Re: Does anyone know the brand of these steps?

    That step is made by Innovaplas.

    www.innovaplas.com
    Josh Ulfers - josh@saltpoolguys.com - 888-725-8766
    SaltPoolGuys.com - AutoPilot Pool Pilot Systems, Parts & Cells - AquaCal Heat Pumps

  7. Back To Top    #7

    Re: Does anyone know the brand of these steps?

    Awesome. Thank you so much.
    21' Round 48" Deep Doughboy Timberline III, 9100 Gallons
    Using 80lb Media Master sand filter and 1HP Powerpak II.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •