G
Guest
Hi,
I'm really happy to have found this forum, as I purchased my home last August, and the pool was crystal clear. After a week or so of using the pool -we noticed that my daughter was getting rashes where her bathing suit chaffed. Being new to maintenance - I had made sure that there was chlorine in the feeder, but had not checked the TA until this happened. Took a sample to Leslie's and proceeded to spend over $200 - $300 in chemicals and finally pool maintenance help to balance, then get rid of algae. The bugs and frogs loved my pool.
This year we replaced the chlorine feeder and old failing Hayward pump with a new Pentair and a Breeze SWG. I've seen the topic raised, but was wondering why an SWG provides more aeration than a normal chlorine system? I don't have water features, just the main return and 2 jets.
I inherited a test kit, but wanted to make sure I was getting accurate readings. I took a sample to Leslie's to see what they had to say and found that my readings were off by a little, but fairly close.
Right now, I'm working at getting the TA down from 170 to the 80-120 range. I've added 5 pounds of dry acid(from Leslie's) in 3 separate doses and need to continue bringing the TA down. After reading here - I went out and picked up a gallon of muriatric acid at tractor supply and will do an additional 1/2 gallon dose this evening.
I also threw Culator pack into my skimmer to work on the yellow stain on the vinyl liner. I've been running the filter pretty much 24/7. Water looks crystal clear - and other than some vacuuming, I'm pretty happy with everything so far. I'm looking forward to starting the BBB method!
I'm new to pool maintenance and would welcome any comments.
Current readings:
total available chlorine - 5ppm
FC - 5ppm (It's been raining and I've been running the salt cell at 100%... just bumped it down to 75% today.)
Salt - 3700 3500-4500 recommended for SG Breeze
CH - 50 way low
CYA - 40
TA - 170
PH - 7.4
Copper&Iron 0
Phospates 200
I'm really happy to have found this forum, as I purchased my home last August, and the pool was crystal clear. After a week or so of using the pool -we noticed that my daughter was getting rashes where her bathing suit chaffed. Being new to maintenance - I had made sure that there was chlorine in the feeder, but had not checked the TA until this happened. Took a sample to Leslie's and proceeded to spend over $200 - $300 in chemicals and finally pool maintenance help to balance, then get rid of algae. The bugs and frogs loved my pool.
This year we replaced the chlorine feeder and old failing Hayward pump with a new Pentair and a Breeze SWG. I've seen the topic raised, but was wondering why an SWG provides more aeration than a normal chlorine system? I don't have water features, just the main return and 2 jets.
I inherited a test kit, but wanted to make sure I was getting accurate readings. I took a sample to Leslie's to see what they had to say and found that my readings were off by a little, but fairly close.
Right now, I'm working at getting the TA down from 170 to the 80-120 range. I've added 5 pounds of dry acid(from Leslie's) in 3 separate doses and need to continue bringing the TA down. After reading here - I went out and picked up a gallon of muriatric acid at tractor supply and will do an additional 1/2 gallon dose this evening.
I also threw Culator pack into my skimmer to work on the yellow stain on the vinyl liner. I've been running the filter pretty much 24/7. Water looks crystal clear - and other than some vacuuming, I'm pretty happy with everything so far. I'm looking forward to starting the BBB method!
I'm new to pool maintenance and would welcome any comments.
Current readings:
total available chlorine - 5ppm
FC - 5ppm (It's been raining and I've been running the salt cell at 100%... just bumped it down to 75% today.)
Salt - 3700 3500-4500 recommended for SG Breeze
CH - 50 way low
CYA - 40
TA - 170
PH - 7.4
Copper&Iron 0
Phospates 200