Hi all:
I'm currently digging up all the gravel and dirt to expose the pipes leading to and from my pool equipment. I need to move all of it about 10 feet or so and I'd like to refresh, replace, rebuild or upgrade while I'm going through the trouble. I'm also removing all copper piping, connectors and (I'm guessing) brass gate valves. Thankfully the copper is only above ground, so matching everything up below ground level in PVC and finishing will be relatively easy.
One of the pieces of equipment I'm not sure about is the filter manifold. This one does work but I was hoping to perhaps update to a modern style....and hopefully one that will line up to the existing filter inlet/outlet.
Any suggestions are greatly appreciated.
(Attached is a pic of the existing manifold)
I'm currently digging up all the gravel and dirt to expose the pipes leading to and from my pool equipment. I need to move all of it about 10 feet or so and I'd like to refresh, replace, rebuild or upgrade while I'm going through the trouble. I'm also removing all copper piping, connectors and (I'm guessing) brass gate valves. Thankfully the copper is only above ground, so matching everything up below ground level in PVC and finishing will be relatively easy.
One of the pieces of equipment I'm not sure about is the filter manifold. This one does work but I was hoping to perhaps update to a modern style....and hopefully one that will line up to the existing filter inlet/outlet.
Any suggestions are greatly appreciated.
(Attached is a pic of the existing manifold)