Hey Everybody,
Just today the local pool company finished a warranty replacement of a vinyl liner, the pool is now refilling.
The warranty replacement was due to an installer mistake at the top seams several years ago when a previous owner was in this house.
I'm kindof wondering what the best next step is...
- wait a day or two and check the water level for evidence of leaks or go ahead and get the chemistry set up?
- what is the proper order for adding chemicals? Shock with bleach first up to 10 ppm FC?
My tap water readings going in to the pool right now are:
temp: 68 F
TDS: 44
Salt: 0 ppm
FC: 0.82
TC: 1.13
pH: 7.2
ALK: 25
CH: 30
CYA: 0
If anyone sees an old post on this topic, please accept my apologies and point me to it.
Thanks!
Just today the local pool company finished a warranty replacement of a vinyl liner, the pool is now refilling.
The warranty replacement was due to an installer mistake at the top seams several years ago when a previous owner was in this house.
I'm kindof wondering what the best next step is...
- wait a day or two and check the water level for evidence of leaks or go ahead and get the chemistry set up?
- what is the proper order for adding chemicals? Shock with bleach first up to 10 ppm FC?
My tap water readings going in to the pool right now are:
temp: 68 F
TDS: 44
Salt: 0 ppm
FC: 0.82
TC: 1.13
pH: 7.2
ALK: 25
CH: 30
CYA: 0
If anyone sees an old post on this topic, please accept my apologies and point me to it.
Thanks!