Ive got a 15x36 ft Intex inflatable ring circle pool. 2 years ago, last time i had it up i suffered from a nearly useless vaccuum with my 1000GPH cartidge filter. So this year i thought id use my 2nd NIB 1000GPH filter in parallel to get vacuuming done better as well as cut my run time in half. I want to have 1 outlet from pool going to a PVC "T" connector, one filter will be connected to SWC then back into at "T" connector after SWC for return to Single inlet back to pool. And the other side of the "T" will simply have my other 1000 GPH Filter on it going to the "T" again and back to pool.
Am I accomplishing 2000 GPH by this design? Or at least more than 1000? Will this ruin pumps? Is the "T" connector after the filters going to be disrupted by water flowing into itself or continue out unimpeded?
Any help would be great, i have all the materials to make it work, just wanted to run it by you fine folks to see if I'm wasting time and money bf I can return the materials and save up for a larger sand filter down the road.
Am I accomplishing 2000 GPH by this design? Or at least more than 1000? Will this ruin pumps? Is the "T" connector after the filters going to be disrupted by water flowing into itself or continue out unimpeded?
Any help would be great, i have all the materials to make it work, just wanted to run it by you fine folks to see if I'm wasting time and money bf I can return the materials and save up for a larger sand filter down the road.