Heat just the spa?

[phoenixtx]

I have an Aqualogic PS8, with a Hayward H400 heater. I messed with the PS8 to figure out if i could just heat thenspa by itself. No look, seemed likemit was trying to heat the whole pool.

I found the menu to adjust "spa heat" but what ever i entered there also reflected on the "pool heat."

Is it possible to just heat the spa?

 

[jblizzle]

You should just be able to select spa mode which should move 2 valves to only have suction and return to the spa. Not sure if you can manually turn on the heater or not. I though it could be set up to automatically heat when switched to spa mode.

Posted from my Droid with Tapatalk ... sorry if my response is short

 

[phoenixtx]

Jblizzle, i think you are right, i'll need to test it out this AM.

 

[phoenixtx]

So that was easy, pressed the "Spa" button the system switched over to spa and i adjusted the temp on the spa individually. Thanks

 

[jblizzle]