Pool was just finished and filled Friday / Saturday. On Monday the PB send over their startup guy to do an acid type startup and to program the Easytouch. We ran the pump the first day for 24 hours in "Service" Mode. Then the PB came over Today and put everything back to "Auto" mode. Right now the VS pump is scheduled to run twice a day, 7 days a week. They scheduled it (supposedly) to run from 8:00am - 1:00pm at 2600rpm. Then the pump is supposed to come on again at 8:00pm - 1:00am, and supposed to run at 1200rpm.
Going through the schedules in the menu I see the "Schedules" menu and both schedules are working. But.. the pump is running at 2600rpm at both times. I verified the speed by selecting the status button and reading off the display in the Easytouch at 9:00pm. I can also visually see that the spillway water flow hasn't changed. When I look at the "Speed" settings.. It shows circuit #1 at 2600rpm [POOL]. Circuit #2 [SPA] at 3450rpm and Circuit #3 [POOL] at 1200rpm. I tried reading through the Easytouch users guide, but can't figure out how to assign the circuits to the schedules.
Can someone help... PB is supposed to come back Friday to get the pool chemicals in check, but I would like to fix this on my own so I can learn a little.
Thanks..
Going through the schedules in the menu I see the "Schedules" menu and both schedules are working. But.. the pump is running at 2600rpm at both times. I verified the speed by selecting the status button and reading off the display in the Easytouch at 9:00pm. I can also visually see that the spillway water flow hasn't changed. When I look at the "Speed" settings.. It shows circuit #1 at 2600rpm [POOL]. Circuit #2 [SPA] at 3450rpm and Circuit #3 [POOL] at 1200rpm. I tried reading through the Easytouch users guide, but can't figure out how to assign the circuits to the schedules.
Can someone help... PB is supposed to come back Friday to get the pool chemicals in check, but I would like to fix this on my own so I can learn a little.
Thanks..