Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 6 of 6

Thread: cord broke off of our pump....

  1. Back To Top    #1

    Join Date
    May 2008
    Location
    gulf coast of Texas
    Posts
    166

    cord broke off of our pump....

    Hubby was going to mow around the pool and went to unplug the pump and when he did, the plug end part stayed in the outlet! Please tell me I can just replace the cord somehow? Would hate to have to replace the whole pump/filter because of one cord. Its only like 4 years old.
    Julie

    Atlantic Pool Products "Prestige" metal wall pool 18' x 48" round
    vinyl liner
    Hayward Power Flo pump
    Hayward Perflex DE Filter Model EC50AC

  2. Back To Top    #2
    Mod Squad Bama Rambler's Avatar
    Join Date
    Jun 2009
    Location
    SouthWest Alabama
    Posts
    22,331

    Re: cord broke off of our pump....

    You certainly can replace the cord (well, maybe not you personally ). If the plug end just came off the cord you can just replace it. If you want to replace the entire cord just get one the same length and gauge and remove the back cover from the pump motor and it should be apparent how to replace it. You may need a couple of spade terminals but they're a common item.
    Dave J. TFP Moderator
    24' x 52" Round AGP. 2hp/¼hp SPL Power-Flo 2-speed pump. 200sqft Waterway Cartridge Filter. 45MHP2(3GPD) Stenner Peristaltic Pump
    Pool School ----- Pool Math ----- TF-Test Kit

  3. Back To Top    #3
    Mod Squad jblizzle's Avatar
    Join Date
    May 2010
    Location
    Tucson, AZ
    Posts
    37,389

    Re: cord broke off of our pump....

    I am sure you reminded him that you are not supposed to pull on the cord
    Jason, TFP Moderator
    18k IG pebblesheen pool, Hayward ProLogic P4 w/ T-15 SWG, Pentair 1HP 2-speed Superflo, Hayward 6020 DE filter
    500 sqft Heliocol solar panels, ThePoolCleaner, TF-100 test kit w/ SpeedStir
    Pool School + Test Kit + PoolMath = A TROUBLE FREE POOL
    If you found TFP helpful and we saved you money ... Become a TFP Supporter!

  4. Back To Top    #4

    Join Date
    Sep 2010
    Location
    Noblesville, IN
    Posts
    104

    Re: cord broke off of our pump....

    Wait a minute....you are mowing???
    16 x 32 15300 gal. IG Vinyl Jandy pump, Jandy sand filter, Paramount circulation system, Automatic pool cover.

  5. Back To Top    #5

    Join Date
    May 2008
    Location
    gulf coast of Texas
    Posts
    166

    Re: cord broke off of our pump....

    Yes...we HAD to mow! We are in Texas near the gulf coast. Wake up to 40 degree weather only to be in the 70's by after lunch.
    Julie

    Atlantic Pool Products "Prestige" metal wall pool 18' x 48" round
    vinyl liner
    Hayward Power Flo pump
    Hayward Perflex DE Filter Model EC50AC

  6. Back To Top    #6
    bobodaclown's Avatar
    Join Date
    Apr 2011
    Location
    Lakeland, FL
    Posts
    2,351

    Re: cord broke off of our pump....

    got a picture?
    17K Kidney Shaped Pool Concrete (Diamond Bright) Pool, 3/4 hp 2 speed 115V Sta-rite Duraglas PEA5D-180L/P2R5D-181L (Impeller C105-92PS Diffuser C1-216P), 1.5 piping, Pentair CC100 Filter , Heat Siphon 100K BTU Heat Pump Pool Heater, Flow meter Blue White Flowmeter Model No. F-30150P, Hayward Astrolight SP0581N, SWCG CalimarTitanium Edition TE45 , Dolphin Nautilus Plus with CleverClean, Lakeland Florida

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •