When the slide was installed, the pool contracter installed 2 each 3/4" fpt flush with the bottom in the beach landing connected to the slide water supply pump line. This makes a small fountain effect on the pool surface of the shallow beach landing. I installed a short piece of pvc pipe to get it closer to the surface, then a longer piece with a 45 degree on the end to shoot the water back into the pool. The water stream just seems to drop away from the stream like a yard sprinkler. What is the trick to make the water stay together in a stream. I have seen dancing water streams and they stay together until they hit the water so I know it can be done. I guess I just want to do it on the cheap. Pros and Cons to fountain effect?