Pool Jet Replacement

[Matt314]

Hi All,

A little background info: I am in the process of restoring a fiberglass pool built in 1989. The pool jets and wall mounts that I am assuming came originally on the pool were weathered, cracked, and needed replacement so I took them off. Now when I take my measurements, which seems to be a female, approx. 2 to 2.5" diameter for a wall mount, I can’t find anything. I took some pictures with measurements and was hoping someone with more experience could steer me in the right direction.

Thanks again for your help!

- Matt


[attachment=0:3ujgcv9e]Pool Jet Before.JPG[/attachment:3ujgcv9e]



[attachment=1:3ujgcv9e]Pool Jet Dia.JPG[/attachment:3ujgcv9e]

 

[Bama Rambler]

That looks like a standard wall fitting like this. I know it says 1.5" but the physical measurements are what you're looking for.

 

[RPS&D]

Yeah, that does look like a normal 1.5" fitting with a 3/4" eyeball. The 1.5" refers to the pipe that it fits on the end of.