Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: WIsper flo 2hp diffuser cone brass bushing is shot

  1. Back To Top    #1

    WIsper flo 2hp diffuser cone brass bushing is shot

    On the pump side of the diffuser cone is a thin brass bushing that the impeller fits in. Mine is shot. I was able to get the pieces of the old one out. Can I buy just the bushing or is it time for a new diffuser?

    Thank you

  2. Back To Top    #2

    In the Industry
    poolsupplysales's Avatar
    Join Date
    Jan 2012
    Location
    Tulare, CA
    Posts
    112

    Re: WIsper flo 2hp diffuser cone brass bushing is shot

    You can not replace just the brass you need the complete defuser part # 072927

  3. Back To Top    #3

    Re: WIsper flo 2hp diffuser cone brass bushing is shot

    Quote Originally Posted by poolsupplysales
    You can not replace just the brass you need the complete defuser part # 072927
    Thank you for the info. Is that something that normally goes bad?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •