Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Intellibrite led lights: One on and one off

  1. Back To Top    #1

    Intellibrite led lights: One on and one off

    I have two lights in the pool and one in the spa. One of the pool lights is working and the spa light is working but the other pool light will not turn on at all. They are only 4 months old and they were working fine last night. Any thoughts?

  2. Back To Top    #2

    In the Industry

    Join Date
    Mar 2011
    Location
    Scottsdale, AZ
    Posts
    406

    Re: Intellibrite led lights: One on and one off

    I would start with connections, as it is very rare to have one of these go bad.

  3. Back To Top    #3
    Mike_W's Avatar
    Join Date
    Aug 2011
    Location
    Orange County, California
    Posts
    142

    Re: Intellibrite led lights: One on and one off

    Are they on the same switch or relay?
    Mike
    ~17' x 34' IG pool with attached spa - 20500 gallons - Gunite with a "pebblesheen"-ish finish
    Jandy iAqualink with iPad and Jandy PDA remote - Pentair IntelliFlo VS 11018 Pump
    AquaRite SWCG - Pentair SMBW 4060 DE Filter - Really Old Raypak heater
    "Wall-E" an Arneson-Hayward Navigator - A couple of Jandy/Zodiac WaterColors LED Lights - Blue-White F-1000 Flow meter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •