- Sep 17, 2012
- 8
Has anyone used one of these, and if so did it work out well for you?
CMP 25549-500 In Ground Pool Light Adapter
http://www.c-m-p.com/PDF/Pool/lightrepairfitting.pdf
My issue is that after at least two refinishes, the bottom clip of my pool light niche is buried in Pebble Tec. Yes, the pool contractor should have caught this and replaced the niche or made some other accommodation for the light, but we're past that point now. The light is basically being held in (barely) just by the top screw and it will not clip in on the bottom.
I'm thinking about trying this Custom Molded Products item. Any other suggestions would also be greatly appreciated.
Thanks!
CMP 25549-500 In Ground Pool Light Adapter
http://www.c-m-p.com/PDF/Pool/lightrepairfitting.pdf
My issue is that after at least two refinishes, the bottom clip of my pool light niche is buried in Pebble Tec. Yes, the pool contractor should have caught this and replaced the niche or made some other accommodation for the light, but we're past that point now. The light is basically being held in (barely) just by the top screw and it will not clip in on the bottom.
I'm thinking about trying this Custom Molded Products item. Any other suggestions would also be greatly appreciated.
Thanks!