Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 6 of 6

Thread: HP and SF determination

  1. Back To Top    #1

    HP and SF determination

    Having trouble determing HP and SF. No indicator other than both fields have ---- Just four dashes like that. Never seen that before, but as i have stated previously. I have been out of the industry for over a decade. Anyway, any insight would be appreciated.

  2. Back To Top    #2

    Join Date
    May 2009
    Location
    Youngsville NC
    Posts
    395

    Re: HP and SF determination

    Is there at least a make and model markings ?
    16x32 IG 19,000 gallons, Pentair 1.5 hp Energy Efficient Superflo pump (348024),vinyl liner, Chlorine dispenser, Hayward S-244T sand filter

  3. Back To Top    #3

    Re: HP and SF determination

    Century Lasar A.O. Smith. Aquatools.

  4. Back To Top    #4

    Re: HP and SF determination

    It is a dual speed motor. I know the service factor determines true HP, but both the sf and hp have the dashes indicators as opposed to an actual numerical value.

  5. Back To Top    #5
    mas985's Avatar
    Join Date
    May 2007
    Location
    Pleasanton, CA
    Posts
    11,474

    Re: HP and SF determination

    Normally, that indicates 1 HP and 1 SF.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  6. Back To Top    #6

    Re: HP and SF determination

    I had a hunch as such, but was really not sure.

    Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •