I've recently switched over to the BBB method and my pool water is looking pretty good. I do however have a couple of questions regarding TA and CYA for my pool.
What should my TA target be now that I've introduced Borates into the pool? My current TA test is showing about 60ppm which is at the low end of the spectrum but before I add any sodium bicarbonate I'd like to know what my target should be taking the borates into consideration.
The second question I have is regarding CYA levels in an indoor pool. My pool receives almost no direct sunlight and is testing at 0 ppm for CYA. Is there any reason to increase my CYA level?
My current chemistry numbers are...
Salt 3100 ppm
pH 7.4-7.6
Borates 50 ppm
CH 210 ppm
FC 5 ppm
TC 5 ppm
TA 60 ppm
CYA 0 ppm
As always, thank you for your input and guidance.
- Chad C
What should my TA target be now that I've introduced Borates into the pool? My current TA test is showing about 60ppm which is at the low end of the spectrum but before I add any sodium bicarbonate I'd like to know what my target should be taking the borates into consideration.
The second question I have is regarding CYA levels in an indoor pool. My pool receives almost no direct sunlight and is testing at 0 ppm for CYA. Is there any reason to increase my CYA level?
My current chemistry numbers are...
Salt 3100 ppm
pH 7.4-7.6
Borates 50 ppm
CH 210 ppm
FC 5 ppm
TC 5 ppm
TA 60 ppm
CYA 0 ppm
As always, thank you for your input and guidance.
- Chad C