I drained and cleaned the pool the other day and then filled it back up overnight. It was filled with well water so when it was finished filling up it was a clear brown color. I added 1 liter of Metal Out and let it circulate for a few hours and that didn't do anything so I tested the pH and it was 8.4. I added acid to lower it down to 7.5 and that seemed like it did very little if anything to clear it up any. It's now been about 24 hours since adding the Metal Out and acid and it looks about the same clear brown color. Is there something else that should be done to clear up the pool before adding the rest of the chemicals that should be done when starting up a pool? There is no chlorine since I haven't added any (because I heard that shocking a pool with metals in it would only make it worse). Please help because I would like to get it going as soon as possible before algae or anything starts growing.