Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: New to the forum

  1. Back To Top    #1

    New to the forum

    3 times is not a charm. Just had a pool built and its been a pain in the you know what. Rain delayed the dig for 2 weeks. Finally got started dug rebar plumbing an gunite all in one week then it sat for 3 weeks, my yard was trashed. We went with Quartzscape Barbados Blue plaster with flagstone coping and Kool Deck. Problems, the kool deck is already stained and chipped, about 30% of the flagstone coping pieces sound loose when you tap on them and the plaster looks like s$#@. My yard had a pretty steep grade so on side of the pool and decking is a foot or more out of the ground and of course they didn't re sod so its rained again and the sand they built it up with has wash away. My main concern is the plaster, they did an acid bath after we filled 2 weeks ago and it still looks like s$#@ and there are areas on the bottom that are super rough. This pool builder has a good reputation in my area.
    The guy who did our start up is suppose to come back next week and do another acid bath. I sure hope this all turns out right!
    Sorry for the venting!!!!!!!!! Thanks!

  2. Back To Top    #2
    linen's Avatar
    Join Date
    Jul 2010
    Twin Cities, MN

    Re: New to the forum

    Welcome to tfp, jmdsurf45

    I am hoping too! Let us know how it comes out.
    TFP Expert who uses Pool School and my TF100 test kit along with PoolMath for my: Round 11K gallon AGP with deep end, 20" sand filter, Matrix 1hp 2spd, 6 2ftX20ft solar panels (and solar cover!), Intex SWCG (copper bars disconnected) and a Rubadub hot tub (chlorine). The SLAM process is not finished until: 1. CC < 0.5 ppm, 2. An OCLT < 1.0 ppm and, 3. The water is crystal clear.

  3. Back To Top    #3

    Join Date
    Feb 2008
    Denton, TX

    Re: New to the forum

    Welcome to TFP!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts