Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: New Liner not comforming to 90degree corners.

  1. Back To Top    #1

    New Liner not comforming to 90degree corners.

    Newly installed rectangular pool . Only been two days but the Liner on the inside 90 degree edge on the botton and the wall has not comformed perfectly to the shape. Still kinda rounded, especially on the botton of the steps. When it comes to the wall corners the PB did state from the begining that the bead gets installed on a 45%. I would assume that only the top portion of the exposed liner would have the gap but the parts below water would conform to the 90 degree. Remember its only been 2 days and they did use a vacuum when filling up to about 8" from the bottom of the shallow end.

  2. Back To Top    #2

    In the Industry
    X-PertPool's Avatar
    Join Date
    Jun 2009
    Exeter, PA

    Re: New Liner not comforming to 90degree corners.

    you'll need to send some pictures. you are talking about vinyl covered steps?
    X-Pert Pool Service
    X-Pert Pool on Facebook and @XPertPoolServic on Twitter
    22,000 gal / 16' x 32' / Vinyl / Hayward s244t /Pentair SuperFlo 1 hp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts