- Mar 12, 2011
- 3
This is my first post but this forum has helped me tremendously already. I have been fighting a green pool the past 2 weeks trying to get it back right. I am almost there but i have a couple of questions. My salt cell went bad and was showing 1600ppm so i added the salt to bring it back up. I had vacuumed to waste so i figured it was low. Well after 24 hours it was showing 1500ppm after the salt was added. :x so i ordered a new cell and some salt strips and sure enough my salt level is 5000ppm. My question is the pool is still cloudy (i can see the bottom of shallow end) should I wait until it is clear or go ahead and start draining? My CH is very high at 470, would this cause the cloudy water? Here are my numbers (taken with tf100)
FC - 25
CC - .5
TA - 80
PH - 7.2
CH - 470
CY - 70
We have a party on Aug. 11 so I need to get it ready by then. Thanks a lot in advance for your help
FC - 25
CC - .5
TA - 80
PH - 7.2
CH - 470
CY - 70
We have a party on Aug. 11 so I need to get it ready by then. Thanks a lot in advance for your help