- Jun 14, 2012
- 2,668
- Pool Size
- 13500
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Edge-40
My pool has three returns - two on the stairs and one along the side of the pool. The side return is setup for a Polaris with a booster pump and due to this has slightly reduced water flow relative to the stairs returns and has no directional eyeball due to the quick disconnect fitting for the Polaris.
I know I can reduce the eyeball sizes on the stairs to increase pressure to the dedicated return - but that won't solve the issue of the lack of a directional flow. Is there anyone who makes an adapter that I can put into the quick release fitting that will give me the directional flow that can be removed when using the Polaris?
Here's a couple of pictures of the arrangement of plumbing and returns to clarify things.
The booster connection bypasses the chlorinator (which is not in use) using the smaller hose seen in the 2nd picture. The small pipe T'd off the stair returns is for the slide.
I know I can reduce the eyeball sizes on the stairs to increase pressure to the dedicated return - but that won't solve the issue of the lack of a directional flow. Is there anyone who makes an adapter that I can put into the quick release fitting that will give me the directional flow that can be removed when using the Polaris?
Here's a couple of pictures of the arrangement of plumbing and returns to clarify things.
The booster connection bypasses the chlorinator (which is not in use) using the smaller hose seen in the 2nd picture. The small pipe T'd off the stair returns is for the slide.