Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 7 of 7

Thread: Test result

  1. Back To Top    #1

    Join Date
    Jul 2011
    Location
    Webster,Wi
    Posts
    58

    Test result

    Did a test tonight and here are the results
    FC-7
    CC-.5
    TC-7.5
    Ph-7.3
    T/A-80
    CH-80
    CYA-45
    I know I need to get the cya up some but overall how does it look?
    18'x52" Intex round AGP, 2650 Krystal Clear SWG pump with sand filter and a Hayward H100ID pool heater. TF100 test kit to keep the water sparkly clean.

  2. Back To Top    #2
    linen's Avatar
    Join Date
    Jul 2010
    Location
    Twin Cities, MN
    Posts
    8,649

    Re: Test result

    It looks great

    I agree, get the cya up to 70-80 for the swg's sake.

    My other recommendation would be lots of swimming
    TFP Expert who uses Pool School and my TF100 test kit along with PoolMath for my: Round 11K gallon AGP with deep end, 20" sand filter, Matrix 1hp 2spd, 6 2ftX20ft solar panels (and solar cover!), Intex SWCG (copper bars disconnected) and a Rubadub hot tub (chlorine). The SLAM process is not finished until: 1. CC < 0.5 ppm, 2. An OCLT < 1.0 ppm and, 3. The water is crystal clear.

  3. Back To Top    #3
    Mod Squad jblizzle's Avatar
    Join Date
    May 2010
    Location
    Tucson, AZ
    Posts
    37,389

    Re: Test result

    Assuming you have a vinyl pool (can't see signatures on phone) everything looks good except for the low CYA. Enjoy! ! !

    Posted with Tapatalk ... sorry if I sound short ... hate typing on phone
    Jason, TFP Moderator
    18k IG pebblesheen pool, Hayward ProLogic P4 w/ T-15 SWG, Pentair 1HP 2-speed Superflo, Hayward 6020 DE filter
    500 sqft Heliocol solar panels, ThePoolCleaner, TF-100 test kit w/ SpeedStir
    Pool School + Test Kit + PoolMath = A TROUBLE FREE POOL
    If you found TFP helpful and we saved you money ... Become a TFP Supporter!

  4. Back To Top    #4
    Vette's Avatar
    Join Date
    Jul 2012
    Location
    Ohio
    Posts
    404

    Re: Test result

    For your Calcium levels, we need to know your pool. If its Vinyl, then that's alright, but if its plaster or anything like that, you want to raise that up to a little over 200.

    Keep an eye on the CC though, you don't want that the creep up.

    Edit: I see now, vinyl it is. Looks great!
    11,700 gallon 21' round 54" deep all-resin AGP - June 2012
    Waterway 1HP 2-speed pump / 100 sq ft cartridge filter
    Hayward 150,000btu Natural Gas heater
    I use and recommend the TF-100 for testing

  5. Back To Top    #5
    linen's Avatar
    Join Date
    Jul 2010
    Location
    Twin Cities, MN
    Posts
    8,649

    Re: Test result

    It's an intex with an swg...for the phone challenged.
    TFP Expert who uses Pool School and my TF100 test kit along with PoolMath for my: Round 11K gallon AGP with deep end, 20" sand filter, Matrix 1hp 2spd, 6 2ftX20ft solar panels (and solar cover!), Intex SWCG (copper bars disconnected) and a Rubadub hot tub (chlorine). The SLAM process is not finished until: 1. CC < 0.5 ppm, 2. An OCLT < 1.0 ppm and, 3. The water is crystal clear.

  6. Back To Top    #6

    Join Date
    Jul 2011
    Location
    Webster,Wi
    Posts
    58

    Re: Test result

    Linen I see you are a UDS'er so am I, best thing I ever made.
    18'x52" Intex round AGP, 2650 Krystal Clear SWG pump with sand filter and a Hayward H100ID pool heater. TF100 test kit to keep the water sparkly clean.

  7. Back To Top    #7
    linen's Avatar
    Join Date
    Jul 2010
    Location
    Twin Cities, MN
    Posts
    8,649

    Re: Test result

    Nothin' like the smell of smoke coming from the UDS wafting over the pool all day, and a butt and some fatties ready to consume come eatin time (plus sneakin some snacks out of the UDS during the day)
    TFP Expert who uses Pool School and my TF100 test kit along with PoolMath for my: Round 11K gallon AGP with deep end, 20" sand filter, Matrix 1hp 2spd, 6 2ftX20ft solar panels (and solar cover!), Intex SWCG (copper bars disconnected) and a Rubadub hot tub (chlorine). The SLAM process is not finished until: 1. CC < 0.5 ppm, 2. An OCLT < 1.0 ppm and, 3. The water is crystal clear.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •