Hello folks, I am a new pool owner for the first time. we have a 26ft Intex ultra frame. My problem is adding a Aqua-trol SWCG to the Intex plumbing.I bought the Aqua-trol RJ system. This set up is made to connect to the return jet strainer via the elbow in this pic [attachment=2:2f3tly61]082.jpg[/attachment:2f3tly61] . This creates 2 problems for me. One the elbow thread is much smaller then the threading on the return jet. need advice on fabricating a custom connection. 2# Ill lose my shut off valve . So ill need to add a ball valve which i would prefer to be between the pool and the aqua-trol but i guess not 100% necessary . I am experienced with all type's of plumbing but not so much with pool plumbing I would prefer to just hard plum from filter to the return jet strainer but it looks like i need to fabricate some sort of fitting because of the way the white flex hose connects. Any help is most appreciated . here are some more pics.