my permanent cemented slip fitting for a union join on my underground pipe is leaking air into the system
I dont want to break it off or saw it off to replace it since its an underground pipe the risk it to high because of the cement slab around it
what should i use to seal the edges of the pipe?
duct tape does not work. I dont want to use toxic glue, I used super glue tape and it works but since its in direct contact with the elements it gets brittle quickly
the soil under the slab is slow eroding and the slab is dropping slowly over the years so the pump no longer sit flat on the plastic base for it to screw into .. I assume this is causing the fracture in the cemented slip pipe. Not a cheap fix but i need something to keep the air out untill i can get the erosion fixed.
I dont want to break it off or saw it off to replace it since its an underground pipe the risk it to high because of the cement slab around it
what should i use to seal the edges of the pipe?
duct tape does not work. I dont want to use toxic glue, I used super glue tape and it works but since its in direct contact with the elements it gets brittle quickly
the soil under the slab is slow eroding and the slab is dropping slowly over the years so the pump no longer sit flat on the plastic base for it to screw into .. I assume this is causing the fracture in the cemented slip pipe. Not a cheap fix but i need something to keep the air out untill i can get the erosion fixed.