Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 6 of 6

Thread: Dream Maker SPA Manual

  1. Back To Top    #1

    Join Date
    Jun 2011
    Location
    New Smyrna Beach, FL
    Posts
    31

    Dream Maker SPA Manual

    My friend has a Dream Maker SPA GLX-UHS-REC-SD-F. I have searched the net for a maintenance manual that will define the failure codes on the controller. The Controller is built be Balboa Instruments PN 53942-01 Inside the controller they have a RS80 number "system wiring diagram". Anybody have any idea where I can get a manual and schematics for this controller??????
    1: 10,000 gals in the ground plaster, Hayward pump SP2715X20 2hp
    2: Aqua Rite Electronic Chlorine Generator / T-Cell-15, Hayward Pro-Grid DE Filter Model DE3620
    3: AquaCal Heat Pump, Astrlite SP0580S Under Water Light
    4: Port PolarisCaretaker, TFTestKit-100

  2. Back To Top    #2

    Join Date
    Jun 2012
    Location
    NJ
    Posts
    50

    Re: Dream Maker SPA Manual

    Here's a manual for a UHS series.. not sure if it's the right one. http://dreammakerspas.com/_PDFs/manual_ ... 062111.pdf

    The controller in that manual looks a lot like the ML240 from here: http://www.balboawatergroup.com/getdoc.cfm?id=174

    Here's a manual for the ML240 (links to a ML200 series, which I believe covers the 240 and also has codes): http://www.poolandspacentre.co.uk/docum ... eGuide.pdf

    Maybe this link to Balboa's troubleshooting will help: http://service.balboa-instruments.com/S ... r_mess.htm
    24,000 gallon in-ground plaster, Pentair FNSP60 60 sq. ft. DE filter @ 9,000 GPH, 2HP WhisperFlo pump, CircuPool RJ45 SWG, 399k BTU Raypak heater, built 2008. Taylor K2006C kit.

  3. Back To Top    #3

    Join Date
    Jun 2011
    Location
    New Smyrna Beach, FL
    Posts
    31

    Re: Dream Maker SPA Manual

    Thanks I will check them out. I found a page with error codes on it but the error we are seeing is not there.
    1: 10,000 gals in the ground plaster, Hayward pump SP2715X20 2hp
    2: Aqua Rite Electronic Chlorine Generator / T-Cell-15, Hayward Pro-Grid DE Filter Model DE3620
    3: AquaCal Heat Pump, Astrlite SP0580S Under Water Light
    4: Port PolarisCaretaker, TFTestKit-100

  4. Back To Top    #4

    Join Date
    Jun 2012
    Location
    NJ
    Posts
    50

    Re: Dream Maker SPA Manual

    Quote Originally Posted by jreedich
    Thanks I will check them out. I found a page with error codes on it but the error we are seeing is not there.
    What's the error code?
    24,000 gallon in-ground plaster, Pentair FNSP60 60 sq. ft. DE filter @ 9,000 GPH, 2HP WhisperFlo pump, CircuPool RJ45 SWG, 399k BTU Raypak heater, built 2008. Taylor K2006C kit.

  5. Back To Top    #5

    Join Date
    Jun 2011
    Location
    New Smyrna Beach, FL
    Posts
    31

    Re: Dream Maker SPA Manual

    He said it was "5". I told him that makes no sense. When I arrived at his house he had powered down the unit. When I turned it back on The thing started to run and is still running. According to him, when he powered on the unit after an idle time of two weeks, it sounded like it was powering up but then stopped after about 2 seconds and the error code 5 showed up. He then powered down and back up with the same results. When I got there and powered up everything was fine. I think maybe the gremlins were at work.
    1: 10,000 gals in the ground plaster, Hayward pump SP2715X20 2hp
    2: Aqua Rite Electronic Chlorine Generator / T-Cell-15, Hayward Pro-Grid DE Filter Model DE3620
    3: AquaCal Heat Pump, Astrlite SP0580S Under Water Light
    4: Port PolarisCaretaker, TFTestKit-100

  6. Back To Top    #6

    Join Date
    Jun 2012
    Location
    NJ
    Posts
    50

    Re: Dream Maker SPA Manual

    I wonder if instead of "5" it was actually "S" and he didn't catch other letters with it. There are a ton of "S" codes in that manual:

    http://www.poolandspacentre.co.uk/docum ... eGuide.pdf
    24,000 gallon in-ground plaster, Pentair FNSP60 60 sq. ft. DE filter @ 9,000 GPH, 2HP WhisperFlo pump, CircuPool RJ45 SWG, 399k BTU Raypak heater, built 2008. Taylor K2006C kit.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •