I noticed my cell light was flashing green, so I came inside and looked at the Intellichlor menu on my touch pad...I had a "check flow / pbc" message, so I figured I would go ahead and clean the cell to see if there was any scale build up. After removing the cell, I saw no debris or scale build up, but I cleaned it anyway with a quick acid/water bath...no foaming so that just confirmed the lack of scale build up...I re-installed the cell and same message.
I looked at the penatir Intellichlor manual, but nothing on that error code. Anyone have any advice?
BTW...cell is only 6 months old.
I looked at the penatir Intellichlor manual, but nothing on that error code. Anyone have any advice?
BTW...cell is only 6 months old.