So now that my pool is almost completely clear, it's time to tackle the lights. There was no power going to my pool lights or my pool shed. I have an electrician friend who came over and replaced the breaker and got the shed light working and then the pool lights working, for a while. there are 2 lights in the pool. one in the deep end and one in the shallow end, same side of the pool and same height. The shallow end light stopped working after 5 min. the deep end light never went out, until later at night when i went to turn it on to look how nice it would look except, neither light worked at that point. he confirmed power is going to the lights. so my questions is, do I have to replace the bulb and the gasket, as it sounds like water got into it, or do i have to replace the whole light, which will be very expensive. and if so where can I get the parts to do this job myself? and to Canada?