Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 5 of 5

Thread: I need help identifying my pump model

  1. Back To Top    #1

    I need help identifying my pump model


    My hayward pump is leaking underneath somewhere, and I've been reading that it's most likely a gasket or seal within the pump. I want to buy a GoKit and possibly other parts, but I don't know what type of Hayward pump I have. Here's what I do know:

    1. Pool was built by the previous home owners in 2001

    2. The hayward pump label wore off.

    3. The Motor label is still legible, but I've looked online and can't find the Hayward model# associated with this motor model#.

    Any ideas?

  2. Back To Top    #2

    Join Date
    May 2009
    Youngsville NC

    Re: I need help identifying my pump model

    How about a bigger picture of the whole pump as well ?
    16x32 IG 19,000 gallons, Pentair 1.5 hp Energy Efficient Superflo pump (348024),vinyl liner, Nature2 Express , Chlorine dispenser, Hayward S-244T sand filter

  3. Back To Top    #3

    Re: I need help identifying my pump model

    Thanks for the help. Here are pictures of the whole pump.

  4. Back To Top    #4

  5. Back To Top    #5

    Join Date
    Apr 2007
    Ft Lauderdale, Florida

    Re: I need help identifying my pump model

    If you're planning on replacing your motor at any time, make sure you look at the horse power AND Service factor rating of your replacement motor. Your NET horsepower is the rated HP x Service Factor (SF).
    As per your ID Label, 2 hp x 1.25 SF = 2.5 net HP.
    This would be the same as a 2.5 HP rated pump with a SF of 1.0 = 2.5 net's a motor industry numbers game.
    Sean Assam -
    National Accounts and Commercial Products Manager
    AquaCal Heat Pumps
    AutoPilot Salt Chlorine Generators

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts