Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: What CH Level Should I Target?

  1. Back To Top    #1
    tcat's Avatar
    Join Date
    May 2012
    Location
    Austin, TX
    Posts
    708

    What CH Level Should I Target?

    So is a CH of 350 OK in a pebble surfaced pool?
    IG pebble, 15,000 gallon
    48 PentAir DE Filter with backwash valve
    PentAir Whisperflo pump with 1hp 2-speed motor
    Aquabot 4WD, Poolskim
    Intermatic Dual Timeclock with freezeguard
    DIY chlorine feed
    BBB

  2. Back To Top    #2
    Butterfly's Avatar
    Join Date
    May 2007
    Location
    South Carolina
    Posts
    10,045

    Re: What CH Level Should I Target?

    Quote Originally Posted by tcat
    So is a CH of 350 OK in a pebble surfaced pool?
    Yep pool-school/recommended_levels
    TFP Moderator TF100 Test Kit TF100 TestKit YouTube Channel PoolMath
    You're done SLAMing when:
    1)You lose 1ppm or less FC overnight, & 2)You have .5ppm CC's or less, & 3)your water is clear.

    ~ One should not use a sledge hammer to swat a mosquito. ~

    If you found TFP helpful and we saved you money ... Become a TFP Supporter!

  3. Back To Top    #3
    tcat's Avatar
    Join Date
    May 2012
    Location
    Austin, TX
    Posts
    708

    Re: What CH Level Should I Target?

    Thanks, wasn't sure if pebble finish was same as plaster...
    IG pebble, 15,000 gallon
    48 PentAir DE Filter with backwash valve
    PentAir Whisperflo pump with 1hp 2-speed motor
    Aquabot 4WD, Poolskim
    Intermatic Dual Timeclock with freezeguard
    DIY chlorine feed
    BBB

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •