Hello all.
I hope Mas will chime in, but all comments welcome.
I picked up one of those clip on amp meters today and I check my pump amp draw. It showed 3.0 amps.
I think that number is too low.
Volts = 120V
Amps=3.0
Filter Gauge PSI = 5 PSI
Flow Rate = 50
Pump is Sta-Rite 1/2 or 3/4 uprated (see signature) 180L
Motor is a AO Smith B2852.
Could it really only be 3 amps. I was expecting at least 10 or so amps.
I hope Mas will chime in, but all comments welcome.
I picked up one of those clip on amp meters today and I check my pump amp draw. It showed 3.0 amps.
I think that number is too low.
Volts = 120V
Amps=3.0
Filter Gauge PSI = 5 PSI
Flow Rate = 50
Pump is Sta-Rite 1/2 or 3/4 uprated (see signature) 180L
Motor is a AO Smith B2852.
Could it really only be 3 amps. I was expecting at least 10 or so amps.