first and foremost, here's the readings done with the taylor K2006 kit:
FC 3
CC 0
pH 7.8
CYA 20
TA 170
CH 240
was recommended by the pool store (they used the same kit and got the same results) to add 3 lbs of CYA and 2gallons of acid. how should I add the acid? all at once, or at 2quart intervals? also, as far as the CYA, its been 20 for a good week or more, and I only lose 1.5-2ppm FC a day, should I leave the CYA where it is or bump it up to 30?
also, people have commented about having PVC "fountains" from their return jets, some use them as a pool cooler, others use them to aerate, can someone take a picture of theirs? I took the screw-on part from the return jet into home depot today, and couldn't find a size that fit it, its slightly larger than 1 1/2, but 2" is too big. Does the threaded part that is in the wall come out and THAT is the part I need to replace? can someone do a DIY for the pool cooler/aerator?
FC 3
CC 0
pH 7.8
CYA 20
TA 170
CH 240
was recommended by the pool store (they used the same kit and got the same results) to add 3 lbs of CYA and 2gallons of acid. how should I add the acid? all at once, or at 2quart intervals? also, as far as the CYA, its been 20 for a good week or more, and I only lose 1.5-2ppm FC a day, should I leave the CYA where it is or bump it up to 30?
also, people have commented about having PVC "fountains" from their return jets, some use them as a pool cooler, others use them to aerate, can someone take a picture of theirs? I took the screw-on part from the return jet into home depot today, and couldn't find a size that fit it, its slightly larger than 1 1/2, but 2" is too big. Does the threaded part that is in the wall come out and THAT is the part I need to replace? can someone do a DIY for the pool cooler/aerator?