Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 10 of 10

Thread: Tf-100 test kit issue!!!!!!

  1. Back To Top    #1
    Articfox918's Avatar
    Join Date
    May 2012
    Location
    Western, Wisconsin
    Posts
    99

    Tf-100 test kit issue!!!!!!

    I was able to figure this out but others may not so I thought it would be helpful to others in the case this has happened to them. I received mt test kit today and there were two bottles marked R-0010 on with clear chemical in it and one with a blue chemical in it. On the calcium hardness test it states to add 20 drops of R-0010 (i assume this is the clear chemical) and then the instruction states to add 5 drops of R-0011L (I assume this is the blue chemical) My Blue bottle and clear bottle were both marked R-0010. I am assuming that the wrong lable was applied to a bottle. Can someone clarify this for me?
    Attached Images Attached Images
    POOL SIZE: 27 FT round 52" Deep on edges 66" Deep in center
    FILTER TYPE: Hayward Sand Filter
    PUMP SIZE: Hayward 1 HP Pump 60GPM
    FILTER SIZE/FLOW RATE: Unknown
    HEATER: None at the moment but in process of making my solar panels should be operational by next season!

  2. Back To Top    #2
    bibeaud's Avatar
    Join Date
    Aug 2011
    Location
    P'Burg NJ
    Posts
    73

    Tf-100 test kit issue!!!!!!

    R0010 is clear. R0011 is colored (purplish/red)
    11,000 Gal Trilogy "Utopia" Fiberglass Pool, 1HP Jandy Pump, Jandy CS200 Cartridge Filter, Raypak 199k BTU Heater, Liquidator, CMP Off-Line Chlorinator. Cleaners: Polaris 360, Blue Diamond, Poolvernuegen Pressure

  3. Back To Top    #3

    In the Industry

    duraleigh's Avatar
    Join Date
    Apr 2007
    Location
    Sebring, Florida
    Posts
    30,084

    Re: Tf-100 test kit issue!!!!!!

    That's exactly what happened. I am sending you a properly labeled R-0011L tomorrow but you can use the mislabeled one as needed. Please PM me your first and last name.
    Dave S.
    42k vinyl and concrete pool, 1.5hp pump, 140gpm filter
    TFTestkits , PoolMath , Pool School

  4. Back To Top    #4
    bibeaud's Avatar
    Join Date
    Aug 2011
    Location
    P'Burg NJ
    Posts
    73

    Tf-100 test kit issue!!!!!!

    Contact tftestkits. There support is excellent and will change out any mislabeled reagents.
    11,000 Gal Trilogy "Utopia" Fiberglass Pool, 1HP Jandy Pump, Jandy CS200 Cartridge Filter, Raypak 199k BTU Heater, Liquidator, CMP Off-Line Chlorinator. Cleaners: Polaris 360, Blue Diamond, Poolvernuegen Pressure

  5. Back To Top    #5

    Join Date
    Jan 2010
    Location
    Randleman,NC
    Posts
    620

    Re: Tf-100 test kit issue!!!!!!

    Quote Originally Posted by duraleigh
    That's exactly what happened. I am sending you a properly labeled R-0011L tomorrow but you can use the mislabeled one as needed. Please PM me your first and last name.
    Excuse Dave he was having a senior moment..lol..just picking you are the best.you know he mixes&label's in the outhouse.He has no light's to see what he is doing.lol
    Leasure bay AG 24ft,52 in high.installed June of 1999. Hayworth S-180 T sand filter/Power-Flo Matrix 1horse 2 speed pump /Aqua Trol SWG/Using TF-100 Test Kit

  6. Back To Top    #6
    Articfox918's Avatar
    Join Date
    May 2012
    Location
    Western, Wisconsin
    Posts
    99

    Re: Tf-100 test kit issue!!!!!!

    Hmm outhouse no lights senior moments and chemicals sounds dangerous

    POOL SIZE: 27 FT round 52" Deep on edges 66" Deep in center
    FILTER TYPE: Hayward Sand Filter
    PUMP SIZE: Hayward 1 HP Pump 60GPM
    FILTER SIZE/FLOW RATE: Unknown
    HEATER: None at the moment but in process of making my solar panels should be operational by next season!

  7. Back To Top    #7

    Join Date
    Jan 2010
    Location
    Randleman,NC
    Posts
    620

    Re: Tf-100 test kit issue!!!!!!

    Quote Originally Posted by Articfox918
    Hmm outhouse no lights senior moments and chemicals sounds dangerous

    Sent from my HTC Desire CDMA using Tapatalk 2
    lol.
    Leasure bay AG 24ft,52 in high.installed June of 1999. Hayworth S-180 T sand filter/Power-Flo Matrix 1horse 2 speed pump /Aqua Trol SWG/Using TF-100 Test Kit

  8. Back To Top    #8
    Isaac-1's Avatar
    Join Date
    May 2010
    Location
    SW Louisiana
    Posts
    6,711

    Re: Tf-100 test kit issue!!!!!!

    It seems like this happened to someone else a couple of weeks ago, I suspect yours may have been mis-labelled at the same time
    Indoor 20x40 35,000 gallon vinyl pool with 1.5 HP 2 speed Jandy FloPro pump, Hayward EC75 Perflex DE filter, 11 4x12 Techno-Solis solar panels w/ Aquasolar controller, Aquabot Turbo T Robot Cleaner. Also LMI metering chlorine dispenser pump and HotSpring Jetsetter
    I use and endorse TFtestKits TF-100 from http://tftestkits.net
    ~Remember TFP counts on your donations to keep this site ad free~

  9. Back To Top    #9
    Mod Squad Bama Rambler's Avatar
    Join Date
    Jun 2009
    Location
    SouthWest Alabama
    Posts
    22,347

    Re: Tf-100 test kit issue!!!!!!

    Somebody's taking a whoopin right about now!
    Dave J. TFP Moderator
    24' x 52" Round AGP. 2hp/¼hp SPL Power-Flo 2-speed pump. 200sqft Waterway Cartridge Filter. 45MHP2(3GPD) Stenner Peristaltic Pump
    Pool School ----- Pool Math ----- TF-Test Kit

  10. Back To Top    #10
    nutjob's Avatar
    Join Date
    May 2011
    Location
    Dallas
    Posts
    109

    Re: Tf-100 test kit issue!!!!!!

    Hahaha! Oh you know we love duraleigh. That's why we tease.
    I laugh—to disguise the tears.
    Size 15,000 gal 510′² | Filtration DE 48′² | Sanitation SWG+O₃ | Placement in-ground (IG) | Finish pebble
    Pumps Intelliflo VS+SVRS main WhisperFlo WF-28 feature | Location Dallas TX US (33ºN 97ºW)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •