Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 6 of 6

Thread: doc.mosi

  1. Back To Top    #1
    doc.mosi's Avatar
    Join Date
    Jun 2012
    Location
    Minnesota
    Posts
    52

    doc.mosi

    Hey all...

    Been reading a ton on the board since I found it.

    I'm strongly considering a swap to the BBB method...it seems...well...to work.

    I think I'll be ordering my test kit soon...

    Anyway...I guess I"ll be a bit needy for the next few weeks...since the swimming season is just beginning and the green swamp in the back yard is not what the family wants to swim in....well it's really cloudy white...like watered down milk at this point.

    Later,
    Dave
    18ft Round Intex Metal Frame, 7000gal, 3/4HP pump, 100lb sand filter, TF-100 Test Kit, through the wall skimmer, Baqua convert...now BBB all the way. :)

    Ugly Drum Smoker (UDS), Weber One Touch gold. (I love smoky meat) :) Saving my $$ for a Big Green Egg.

    Things I use daily:

  2. Back To Top    #2

    In the Industry

    duraleigh's Avatar
    Join Date
    Apr 2007
    Location
    Sebring, Florida
    Posts
    30,083

    Re: doc.mosi

    Welcome to the forum.
    Dave S.
    42k vinyl and concrete pool, 1.5hp pump, 140gpm filter
    TFTestkits , PoolMath , Pool School

  3. Back To Top    #3
    Mod Squad Bama Rambler's Avatar
    Join Date
    Jun 2009
    Location
    SouthWest Alabama
    Posts
    22,347

    Re: doc.mosi

    Welcome to TFP.
    Dave J. TFP Moderator
    24' x 52" Round AGP. 2hp/¼hp SPL Power-Flo 2-speed pump. 200sqft Waterway Cartridge Filter. 45MHP2(3GPD) Stenner Peristaltic Pump
    Pool School ----- Pool Math ----- TF-Test Kit

  4. Back To Top    #4
    linen's Avatar
    Join Date
    Jul 2010
    Location
    Twin Cities, MN
    Posts
    8,649

    Re: doc.mosi

    Welcome to tfp, doc.mosi

    YES...another one of us Minnesotans

    I am looking forward to your baqua conversion thread!
    TFP Expert who uses Pool School and my TF100 test kit along with PoolMath for my: Round 11K gallon AGP with deep end, 20" sand filter, Matrix 1hp 2spd, 6 2ftX20ft solar panels (and solar cover!), Intex SWCG (copper bars disconnected) and a Rubadub hot tub (chlorine). The SLAM process is not finished until: 1. CC < 0.5 ppm, 2. An OCLT < 1.0 ppm and, 3. The water is crystal clear.

  5. Back To Top    #5
    gboulton's Avatar
    Join Date
    Apr 2012
    Location
    Nashville, TN
    Posts
    380

    Re: doc.mosi

    Welcome!
    -Gordon
    Pool School helps me maintain my 13,500G 24' x 48" ASP with Sand Filtration using a TF100 Test Kit and Pool Calculator.
    Remember, the Shock Process should be followed until : 1. CC is less than 0.5 ppm, 2. An OCLT shows a loss of 1.0 ppm or less and, 3. The water is crystal clear.
    --I didn't buy my pool to swim in it. I bought my pool to watch my wife swim in it. :wink:

  6. Back To Top    #6
    Butterfly's Avatar
    Join Date
    May 2007
    Location
    South Carolina
    Posts
    10,045

    Re: doc.mosi

    Hi Dave and welcome to the forum
    TFP Moderator TF100 Test Kit TF100 TestKit YouTube Channel PoolMath
    You're done SLAMing when:
    1)You lose 1ppm or less FC overnight, & 2)You have .5ppm CC's or less, & 3)your water is clear.

    ~ One should not use a sledge hammer to swat a mosquito. ~

    If you found TFP helpful and we saved you money ... Become a TFP Supporter!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •