Hey all....
Just now getting the pool filled for the first time and have the following from the TF-100:
FC= 0
CC= 0
TC= 0
pH= 8.2
T/A= 70
CH= 8
CYA< 20
Temp= 65
Have not fired up the Autopilot yet but plan to add the salt later this evening.
The pool is a gecian L and is around 34000 gallons: 16x24x42, 3' to 8' on the diving end
The pool has a vinyl liner
No metals
Water is clear...maybe a little cloudy with the lights on but you can definitely see the drain covers clearly
We have a TA100 sand filter
I know there are options besides the pools store to get the chlorine up before the autopilot gets going. Any suggestions as far as where I need to go from here? Thanks!!!!!!!!
Just now getting the pool filled for the first time and have the following from the TF-100:
FC= 0
CC= 0
TC= 0
pH= 8.2
T/A= 70
CH= 8
CYA< 20
Temp= 65
Have not fired up the Autopilot yet but plan to add the salt later this evening.
The pool is a gecian L and is around 34000 gallons: 16x24x42, 3' to 8' on the diving end
The pool has a vinyl liner
No metals
Water is clear...maybe a little cloudy with the lights on but you can definitely see the drain covers clearly
We have a TA100 sand filter
I know there are options besides the pools store to get the chlorine up before the autopilot gets going. Any suggestions as far as where I need to go from here? Thanks!!!!!!!!