Live in the NorthEast...Just converted to a AquaRite Salt System. Water is balanced.. When the salt system turns on..cloudy water comes from the jets--picture attached. It gives a strong chlorine smell. It obviously is generating chlorine due to the readings below... The first few times it foamed up the pool like a bubble bath.. thought it may have been the algaecide..but it has been three weeks.. now it clouds the entire pool and leaves a foam on the top....once I shut the salt system.. the pool clears.. This is getting very frustrating! Anyone have any ideas? I did use liquid shock for the first time to open the pool prior to installing the salt generator (about 3 weeks ago).
SOLUTION::::
I noticed a lot of air in the pump basket..never had it before..So grasping at straws... I replaced the gasket on the union before the pump and the basket seal... air gone... cloudy water gone!!!!! Hope this can help someone in the future!
[attachment=0:3aiq7wd0]cloudy.jpg[/attachment:3aiq7wd0]
SOLUTION::::
I noticed a lot of air in the pump basket..never had it before..So grasping at straws... I replaced the gasket on the union before the pump and the basket seal... air gone... cloudy water gone!!!!! Hope this can help someone in the future!
[attachment=0:3aiq7wd0]cloudy.jpg[/attachment:3aiq7wd0]