Parts needed to mod a 2650 sandfilter

[bigorange0711]

Can someone give me a set of plans/PVC parts needed to mod a 2650 sandfilter set up to full PVC(No hoses) please

 

[linen]

Welcome to tfp, bigorange0711

I think this link may help you: http://www.troublefreepool.com/custom-pvc-pipe-adapter-for-intex-pools-t28971.html

 

[racerboy6996]

in the link that linen posted, look for the post from Rªzª on June 14, 2011.. that is the method I used.
Very simple. The part you are looking for is a 1 1/2 conduit box adapter.
You will then take one of the connectors off of an Intex hose & slide over this adapter before gluing on your PVC pipes.
Works perfectly

 

[bigorange0711]

You need? to use 1 1/4 pvc pipe, 1 1/2 2 way pvc ball valve, and for the connection The part you are looking for is a 1 1/2 conduit box adapter. Pick up some rough grain sandpaper also to sand the end of the PVC pipe to make the box adapter slide over if needed.

You will then take one of the connectors off of an Intex hose & slide over this adapter before gluing on your PVC pipes.

Works perfectly