intex rectangle pool 12'x24'x52"

May 23, 2012
10
Omaha, Nebraska
HI everyone, I'm putting the pool up for the first time and im noticing the long sides of the pool are bowwing in quite a bit. Is this normal? And will it straighten out on it's own. It 's almost 3/4 full but it doesn't seem to be moving at all. I can try to add pictures if needed.
thanks in adavance. Jason
 
Wow, that is not what I expected! But I don't have one, so can't tell you if that is normal or not. That fact that both sides are doing makes it possible this is what people are talking about. ... hope one of the members with this pool chimes in soon.
 

Enjoying this content?

Support TFP with a donation.

Give Support
that is exactly how mine looked until it was completely full
it is part of the weird intex design
Even completely full it may have a slight bow to it

half full
20120511185350-M.jpg


almost full
20120423134250-M.jpg
 
I had read enough posts about the sidewalls that the bowing didnt worry me, but the corners did.
I thought they were going to slide out of the top rail.
dont worry, the corners will adjust themselves as the pool gets full
At full capacity the corners will be able to slide back & forth a little as the side walls flex with the water movement
 
  • Like
Reactions: megadz87

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.