Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Aqua rite reading pcb

  1. Back To Top    #1

    Aqua rite reading pcb

    I have replaced tHe current inrush limiter and still have
    The same problem. If I cut the Power off and turn it back on it works for less than 12 hours and goes back to reading pcb. Last year I found the fuse melted to the unit so I bought an inline fuse kit and put back together with a 20 amp fuse. It's out of warranty and don't want to spend a fortune. I have a picture but can't upload from my phone. Please help

  2. Back To Top    #2

    Join Date
    Feb 2008
    Flower Mound, TX

    Re: Aqua rite reading pcb

    Welcome to TFP!

    Someone will be along soon to help you with your questions.
    10K gallon IG gunite with waterfall; Pentair CC320P filter; WhisperFlo 2 HP pump
    TF Test Kits - Pool Math - Pool School
    "It depends."- JohnT

  3. Back To Top    #3

    Re: Aqua rite reading pcb

    My Aqua rite is also reading PCB I have replaced the limiter twice but that only works a few weeks. If I shut down the power it will work again for a few hours. Do I need to repace the board?
    14 x 30 above ground vinyl indoor
    New Pentair Whisperflow 1.25 HP pump - pump runs 18 hours/day
    New 22 Hayward Sand Filter with Zeobryte
    New Vanee HRV system

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts