I had the calcium cleaned from the tiles by a company that used the “Greenest safest process”, one that supposedly did not require draining the pool.
After the cleaning, I had what appeared to be thousands (and thousands) of calcium particles in the pool. After weeks of scraping and vacuuming, it appeared I had finally removed most all of the particles. Yesterday morning, the pool was again full of thousands of small particles in the water, and the salt cell required cleaning. In the last four weeks or so I have had to clean the cell almost weekly.
The water its self is crystal clear (except for the floating particles) and all chemical levels are within acceptable ranges, FAC – 3, PH – 7.6, Alkalinity – 120, CYA – 60, Calcium Hardness – 290, Salt – 3000, phosphates – 0
Why do I continue to have these particulates reappear?
Thanks in advance for any help on this frustrating matter.
After the cleaning, I had what appeared to be thousands (and thousands) of calcium particles in the pool. After weeks of scraping and vacuuming, it appeared I had finally removed most all of the particles. Yesterday morning, the pool was again full of thousands of small particles in the water, and the salt cell required cleaning. In the last four weeks or so I have had to clean the cell almost weekly.
The water its self is crystal clear (except for the floating particles) and all chemical levels are within acceptable ranges, FAC – 3, PH – 7.6, Alkalinity – 120, CYA – 60, Calcium Hardness – 290, Salt – 3000, phosphates – 0
Why do I continue to have these particulates reappear?
Thanks in advance for any help on this frustrating matter.