These are my current readings using the Taylor K2006 test kit:
FC - 3.2
CC - 0
pH - 7.5
TA - 80
CH - 250
CYA - 48
Salt - 3500
Water Temp - 84
Air Temp - 100+
See equipment specs in signature block
I have to add 8 to 16 oz of muriatic acid every day to maintain the pH at about 7.5. It tends to go to 7.7 very quickly. The pool is 11 months old and has a PebbleTec surface and a spa spillway into the pool. I get minor scaling on the tile but brush it 2-3 times a week.
Is this normal to have to add this amount of acid this frequently?
FC - 3.2
CC - 0
pH - 7.5
TA - 80
CH - 250
CYA - 48
Salt - 3500
Water Temp - 84
Air Temp - 100+
See equipment specs in signature block
I have to add 8 to 16 oz of muriatic acid every day to maintain the pH at about 7.5. It tends to go to 7.7 very quickly. The pool is 11 months old and has a PebbleTec surface and a spa spillway into the pool. I get minor scaling on the tile but brush it 2-3 times a week.
Is this normal to have to add this amount of acid this frequently?