I now own the following equipment, but i am not completely sure if the SWG can be used with this pump.
Pentair Superflo 1 HP; 2 Speed
Intex SWG (I think the manual says it needs between 700 and 4000 gph)
Pentair 200 sq ft cart filter
Pentair 400,000 btu Nat gas heater
I think the pump is likely too big for the Intex SWG, but I'd like to know that for sure before I abandon the thought of using it. I can't figure out the flow rate of the Superflo. I have read the whole manual that came with the pump, but it really just shows install directions. Searching on-line yields graphs and charts I can't make sense of. I have also searched on this site, and although I know lots of you use the Intex SWG, I haven't found a discussion of what pumps it will work with (sorry if I missed it).
I am hoping that there is some way to use the SWG if I have the pump on low speed. But I think I have to have the pump on high speed to use the heater. If that is how the flow rates work out, is that do-able?
Here is the graph the might have the answer on if the pump will work at all with the SWG:
[attachment=0:3lfgsuh0]superflo.jpg[/attachment:3lfgsuh0]
Thanks for any help.
Pentair Superflo 1 HP; 2 Speed
Intex SWG (I think the manual says it needs between 700 and 4000 gph)
Pentair 200 sq ft cart filter
Pentair 400,000 btu Nat gas heater
I think the pump is likely too big for the Intex SWG, but I'd like to know that for sure before I abandon the thought of using it. I can't figure out the flow rate of the Superflo. I have read the whole manual that came with the pump, but it really just shows install directions. Searching on-line yields graphs and charts I can't make sense of. I have also searched on this site, and although I know lots of you use the Intex SWG, I haven't found a discussion of what pumps it will work with (sorry if I missed it).
I am hoping that there is some way to use the SWG if I have the pump on low speed. But I think I have to have the pump on high speed to use the heater. If that is how the flow rates work out, is that do-able?
Here is the graph the might have the answer on if the pump will work at all with the SWG:
[attachment=0:3lfgsuh0]superflo.jpg[/attachment:3lfgsuh0]
Thanks for any help.