Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Fibre Tech Pool Resurfacing

  1. Back To Top    #1

    Join Date
    Mar 2012
    Tampa Bay, Florida

    Fibre Tech Pool Resurfacing

    What have been the experiences with rebuilding an old plaster in-ground pool and using FibreTech (fiberglass) instead of just re-plastering? We have a local Fibre Tech dealer in Largo, FL and I am thinking of getting a quote. Does anyone have any experience with this process? Any pitfalls or potential warranty issues? Any horror stories?

    I appreciate any comments.
    John (DIYer). Concrete, approximately 13,000 gallon in-ground pool with adjoining concrete spa. Approximately 40 years old. Hayward Super II pump for pool and legacy Anthony Sta-Rite bronze pump CF6 for spa, VA-26 filter,(2 sets), Rheem propane heater for spa. HASA Liquidator for pool.

  2. Back To Top    #2
    JasonLion's Avatar
    Join Date
    May 2007
    Silver Spring, MD

    Re: Fibre Tech Pool Resurfacing

    Doing this is very rare and highly dependent on the skill of the installer. When done well it can turn out wonderfully, but there is a fair bit of room for problems.
    19K gal, vinyl, 1/2 HP WhisperFlo pump, 200 sqft cartridge filter, AutoPilot Digital SWG, Dolphin Dynamic cleaning robot
    Creator of PoolMath and Pool Calculator. Other handy links: Support this site, TF Test Kits, Pool School

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts