I am taking care of a salt water pool.
These are a bit new to me, but I am learning more and more every year.
Pool is 58,000
FC 3.5
Ph 7.6
TA 100
Ch 250
Cya 45
Everything is running well except the IC40s.
The builder for some reason installed 3 of them, suffice to say they are hardly ever
Run on their higher settings.
They are less than five years old.
They are parallel, 1,2,3
First SWG is blinking that the cell is going bad, the second is red and not running because the
Salt is low,
And the third unit is running perfectly with nothing to report but green lights.
Any thoughts?
Thanks,
PF
These are a bit new to me, but I am learning more and more every year.
Pool is 58,000
FC 3.5
Ph 7.6
TA 100
Ch 250
Cya 45
Everything is running well except the IC40s.
The builder for some reason installed 3 of them, suffice to say they are hardly ever
Run on their higher settings.
They are less than five years old.
They are parallel, 1,2,3
First SWG is blinking that the cell is going bad, the second is red and not running because the
Salt is low,
And the third unit is running perfectly with nothing to report but green lights.
Any thoughts?
Thanks,
PF