- Jul 9, 2011
- 86
Pool has been sitting for 1.5 weeks. I vacuumed like crazy after we had some serious wind storms but the water is really cloudy. Yesterday I added salt and that is all I have done. I do have a swg . Pump is now running on low for 24/7. I pulled out my test kit and tested but the only thing I can report is
pH 8.0
Salt is 3400 ppm
There is really nothing else reading anything? No clorine, free combined or total. Cya did not register either.
Should I just be patient and let my swg work or should I shock my cloudy water into submission? Or perhaps I am totally off base. We don't plan on kicking on the heater until our nights are above 48 at least so that gives me a month to figure this out.
Thanks so much.
pH 8.0
Salt is 3400 ppm
There is really nothing else reading anything? No clorine, free combined or total. Cya did not register either.
Should I just be patient and let my swg work or should I shock my cloudy water into submission? Or perhaps I am totally off base. We don't plan on kicking on the heater until our nights are above 48 at least so that gives me a month to figure this out.
Thanks so much.