[attachment=0:3cezaf2s]photo 2.JPG[/attachment:3cezaf2s]I just noticed my there is not water running in the pump,
The Jandy Aquapure shows no service/error code.
when I turn the pump on, it makes the running noise for 3-4 seconds and then goes silent. No noise of the working pump. The pump motor was very hot on touching, so I am assuming I had lost the pump motor and it needs to be replaced.
i would appreciate if you could tell me what motor it is, I am attaching the pictures of the motor.
its about 18, 000 gallon salt water pool. I was wondering whats the advantage of having a 2 speed motor.
the pump is Jandy Stealth SHPM2.0
Another thing I wanted to know is, if the motor can be repaired at all, or it has to be replaced?
Appreciate all the help.
Thank You
The Jandy Aquapure shows no service/error code.
when I turn the pump on, it makes the running noise for 3-4 seconds and then goes silent. No noise of the working pump. The pump motor was very hot on touching, so I am assuming I had lost the pump motor and it needs to be replaced.
i would appreciate if you could tell me what motor it is, I am attaching the pictures of the motor.
its about 18, 000 gallon salt water pool. I was wondering whats the advantage of having a 2 speed motor.
the pump is Jandy Stealth SHPM2.0
Another thing I wanted to know is, if the motor can be repaired at all, or it has to be replaced?
Appreciate all the help.
Thank You