Auqarite installed with new pool 2004. Has been virtually trouble free. Replaced cell last year. I have been adding chlorine to keep pool clean. Power on light is on, but no other lights.
Diagnostic display: Temp 80, Cell Volt 30.8, Cell Current 0, Desired output 50%. Instant Salinity 0, Product AL-5, SW r 1.33
Water tested today. Salt was low, but added 100 lbs to bring to desired level.
FC 4 ppm
PH 7.6
TA 120
CH 250
CYA 60
Diagnostic display: Temp 80, Cell Volt 30.8, Cell Current 0, Desired output 50%. Instant Salinity 0, Product AL-5, SW r 1.33
Water tested today. Salt was low, but added 100 lbs to bring to desired level.
FC 4 ppm
PH 7.6
TA 120
CH 250
CYA 60