Need Equipment Pad Idea

[Bluegrassman]

Ok guys and gals. I need ideas quick! We have our equipment pad poured 4x8. I am looking for a nice way of mounting the EasyTouch and any other assorted breakers, etc. One idea is pouring or blocking up a wall on side or rear of pad.

Any other ideas? Hope to be doing this in the next couple of days.

 

[Bluegrassman]

As you can see from my post here: viewtopic.php?p=333115#p333115
I apparently have a little more time to decide now

Sent From My Inspire 4G Using Tapatalk

 

[CraigMW]

You could have them drop a couple of 1 1/2" diameter galvanized steel posts into post holes dug below where they will pour the slab. Or you could have the poles dropped in holes beside the pad. As long as the poles are relatively straight, you could then mount the Easytouch panel onto the pipes. What else needs to be mounted?

 

[rhumbaclave]

Does the easytouch need to be covered by a roof of some sort?

 

[bk406]

Does the easytouch need to be covered by a roof of some sort?

Not really. Mines out on the side of the house. Rain, snow, ice. I've had no issue in 4 years.

 

[Bluegrassman]

Thanks for the suggestions

Sent From My Inspire 4G Using Tapatalk