Hi, I just got done replacing the bearings in my hot tub spa pump motor.everthing seemed to go together smoothly. I turned on the power and the motor appears to be running nice and quiet. the heater and blower is working. I seem to have a problem now with the filtration cycle. instead of having the option to program the cycle 3 times a day(selecting 1,2,or 3 for 24,12,or every 8 hours) it will only let me program it 2 times a day(selecting 1 ,2 instead of 1,2,3) and instead of letting me program the run time for 60,120,180 or 480 minutes it will only let me select 60 or 120 minutes. I also noticed that when the filter cycle turned on, first the blower turns on and then the motor runs at low speed, after the blower turns off the motor did not come on on low speed. I didn't disturb anything in the control panel so I am at a loss as to what the problem is. Is it possible this is a problem with the start switch adjustment located under the canopy on the motor? any help would be appreciated thanks