Pentair SuperFlo 340044 2 speed wiring help

[Guest]

I have a new pump . I having trouble to figure it out how to connect the wires. I have 4 wires. green - ground, red - low speed, grey - common and black - high speed.
But in th back of the motor is not clear where to connect what.
I only have numbers 1,2,3,4,5 and 6
Can any one help me?

 

[thepoolman]

The green wire goes on the green ground screw, grey and black go on L1 and L2(doesn't matter which one) and your red goes on the other lug. I think they're usually labeled A or B. it's gonna be a screw on a post that sticks up higher than the other lugs. If it came with a factory installed switch, that will be disconnected when connecting to some type of controller

 

[Guest]

Thanks. I figure it out. the green is ground, the grey (common) in No 1, the black high speed No 2 and the red one low speed No 3. There is no L1 or L2 , just numbers.