Did a 60% replacement over the last two days. Pool is filled back up. All my tests look good with the exception of CYA and CH. Went ahead and took a sample to the pool store today to get some additional feedback before I went overboard with the stabilizer. I know the CYA is subjective but I came up with a 30 result and the pool store came up with 70. Hard to determine where I really am. Any thoughts?
Pool store said I am low on hardness. This actually makes sense since the water I filled the pool with was through a water softening system. They measured a 170 but for some reason I can get a reading with my test kit. I am not getting any coloration when I add the R-0011L mix. Then the R-0012 never turns the water blue even after 50 drops.
BTW, I am using the TF-100 kit.
Pool store said I am low on hardness. This actually makes sense since the water I filled the pool with was through a water softening system. They measured a 170 but for some reason I can get a reading with my test kit. I am not getting any coloration when I add the R-0011L mix. Then the R-0012 never turns the water blue even after 50 drops.
BTW, I am using the TF-100 kit.